News center
The appearance and environmental protection indicators are built according to international standards.
Your location :
Homepage
>
>
>
How to buy cabinets

How to buy cabinets

(Summary description)The method of purchasing cabinets. Cabinets are one of the more common furniture in our life. Many friends don't know what problems to pay attention to when purchasing cabinets. This paper introduces the common methods of purchasing cabinets for you.

Take a look at the edge sealing of the plate. The edge sealing of high-quality cabinets is delicate, smooth and feels good, the sealing line is straight and smooth, and the joint is fine. Professional large factories use linear edge banding machine to complete the processes of edge banding, broken end, trimming, chamfering and polishing at one time, so as to ensure the most accurate size. The workshop type small factory is to apply glue with a brush, manually press and seal the edge, repair the edge with a wallpaper knife, and polish with a manual polishing machine. Due to uneven pressure, many places are not firm, and formaldehyde and other harmful substances will volatilize into the air.

Second, look at punching. The current panel furniture is assembled by three in one connectors. The matching and accuracy of the hole position will affect the structural firmness of the cabinet.

Third, look at the cutting board. Cutting board is the first process of cabinet production. Large professional enterprises use electronic cutting saws to input processing dimensions through computers, and the computer controls the dimensional accuracy of material selection. In addition, several plates can be processed at one time. The performance of the equipment is stable, the dimensional accuracy of the plates is very high, and the tolerance unit is in microns.

Look at the door panel. The door panel is the face of the cabinet, which is as important as people's face. The door panels produced by small factories are prone to moisture and deformation due to improper treatment of substrate and surface technology.

How to buy cabinets

(Summary description)The method of purchasing cabinets. Cabinets are one of the more common furniture in our life. Many friends don't know what problems to pay attention to when purchasing cabinets. This paper introduces the common methods of purchasing cabinets for you.

Take a look at the edge sealing of the plate. The edge sealing of high-quality cabinets is delicate, smooth and feels good, the sealing line is straight and smooth, and the joint is fine. Professional large factories use linear edge banding machine to complete the processes of edge banding, broken end, trimming, chamfering and polishing at one time, so as to ensure the most accurate size. The workshop type small factory is to apply glue with a brush, manually press and seal the edge, repair the edge with a wallpaper knife, and polish with a manual polishing machine. Due to uneven pressure, many places are not firm, and formaldehyde and other harmful substances will volatilize into the air.

Second, look at punching. The current panel furniture is assembled by three in one connectors. The matching and accuracy of the hole position will affect the structural firmness of the cabinet.

Third, look at the cutting board. Cutting board is the first process of cabinet production. Large professional enterprises use electronic cutting saws to input processing dimensions through computers, and the computer controls the dimensional accuracy of material selection. In addition, several plates can be processed at one time. The performance of the equipment is stable, the dimensional accuracy of the plates is very high, and the tolerance unit is in microns.

Look at the door panel. The door panel is the face of the cabinet, which is as important as people's face. The door panels produced by small factories are prone to moisture and deformation due to improper treatment of substrate and surface technology.

Information

The method of purchasing cabinets. Cabinets are one of the more common furniture in our life. Many friends don't know what problems to pay attention to when purchasing cabinets. This paper introduces the common methods of purchasing cabinets for you.

Take a look at the edge sealing of the plate. The edge sealing of high-quality cabinets is delicate, smooth and feels good, the sealing line is straight and smooth, and the joint is fine. Professional large factories use linear edge banding machine to complete the processes of edge banding, broken end, trimming, chamfering and polishing at one time, so as to ensure the most accurate size. The workshop type small factory is to apply glue with a brush, manually press and seal the edge, repair the edge with a wallpaper knife, and polish with a manual polishing machine. Due to uneven pressure, many places are not firm, and formaldehyde and other harmful substances will volatilize into the air.

Second, look at punching. The current panel furniture is assembled by three in one connectors. The matching and accuracy of the hole position will affect the structural firmness of the cabinet.

Third, look at the cutting board. Cutting board is the first process of cabinet production. Large professional enterprises use electronic cutting saws to input processing dimensions through computers, and the computer controls the dimensional accuracy of material selection. In addition, several plates can be processed at one time. The performance of the equipment is stable, the dimensional accuracy of the plates is very high, and the tolerance unit is in microns.

Look at the door panel. The door panel is the face of the cabinet, which is as important as people's face. The door panels produced by small factories are prone to moisture and deformation due to improper treatment of substrate and surface technology.

Scan the QR code to read on your phone

Relevant information

In

In the face of all kinds of furniture placement, highlighting position C can reflect the beauty

When we decorate at home, we need to consider all aspects. From material selection to decoration and layout. Facing all kinds of furniture, C should be clear about furniture. There are many different areas in the home, such as dining space, rest area and leisure space for guests. Each area needs different furniture, which can be well matched to enhance the beauty of a home. When choosing furniture, we should pay attention to the choice of color. If it is the tone of light color system, you can choose some multi-color furniture to brighten the effect. If the color of the whole home is stronger, the furniture can be simpler. The second is the choice of materials. Generally speaking, many people prefer simple wood. Because of its hard texture and wooden texture, it has a natural flavor. You can also choose cloth or metal materials to feel different charm. The living room sofa is the protagonist The living room is the central area of a home, so when we design, we will certainly put more thought and energy into it. A beautiful living room can give visitors and themselves a bright effect. There are more furniture in the living room, but when it comes to c-position furniture, everyone has different ideas. For me, the c-position furniture in the living room should be the sofa, which lays a comfortable tone of life. Facing different house types, the choice of sofa is also different. Small house type shall be dominated by simple sofa as far as possible, such as classic one-line type. The large house type can choose the combined design, which is more atmospheric. In order to enhance the warm feeling of the living room, you can try the material of cloth art. Soft fabric and internal filling bring a great sense of dependence. Solid wood frame can be added to improve the load-bearing effect. Blessing from the dining table For the restaurant, the furniture in position C should be the dining table. With the blessing of a table with beauty and material, it seems that the whole restaurant will become more pleasing to the eye, and the dining process will be happier. In the face of different styles, the dining table also has different designs, which are generally made of solid wood. You can choose the design of square table or round table according to your preference, which fits the space of the whole restaurant. If the area of the restaurant itself is not very large, you can try a dining table with telescopic function. The size of the dining table can be adjusted according to the number of diners. It has a super practical function, which is a blessing for small households. Desktop design has a variety of choices, and the wooden desktop has the charm of returning to nature. The marble material, smooth and delicate touch, will be easier to take care of. And beautiful texture, without losing light luxury temperament. Kitchen cabinets set the tone The kitchen is a cooking area. If you want to eat delicious food, of course, you have to make it. For the kitchen, the furniture of position C should be the cabinet. Large cabinets determine the tone of the kitchen. The design of the cabinet should be determined according to the kitchen, otherwise it will give people the feeling of overcrowding, which will affect the feeling of cooking. And there should be multiple storage spaces, so as to make the kitchen cleaner. Some cabinets may be too high, but such design is not practical. Therefore, it is best to customize according to the height to improve the utilization of the interior space of the cabinet, and the practicability will be stronger. Cabinets are made of solid wood and metal. Considering the oil fume in the kitchen, more metal materials will be selected. Smooth and delicate surface, easier to take care of. Of course, if the hood is strong enough, the wooden cabinet is also very awesome.
2021-01-05
Cleaning

Cleaning and maintenance of TV cabinet

The interior of the TV cabinet or the back of the TV cabinet is easy to produce dead corners and accumulate dust. Therefore, you should clean it diligently and wipe it with a clean rag. 2. Dilute olive oil with water and wipe it with cloth to make the wooden cabinet smooth and shiny. 3. The action of opening and closing the door panel or drawer should not be too rude, especially the glass TV cabinet. If it is not used properly, it will cause unexpected injury. 2、 Placement of TV cabinet 1. The TV cabinet should be placed in front of the main wall of the theme wall of the living room. If you can project clear light on the TV cabinet, you can soften the original colder electrical equipment, increase the sense of hierarchy and make the object have a three-dimensional sense. 2. The relevant items of the TV cabinet, such as antenna, wire, etc., can be stored in the back of the TV cabinet in a consistent manner, so as not to hinder the beauty.
2021-01-05
Cleaning

Cleaning methods and precautions of cloth sofa

In the sofa Market, cloth sofa has been loved by many consumers because of its comfortable feel and beautiful shape. But many people don't know how to clean cloth sofa and what precautions should be taken when cleaning. A reference. I hope this article can help you. 1. It is not suitable to use a large amount of water for scrubbing If the cloth sofa is cleaned with a large amount of water, the water may penetrate into the inner layer of the sofa, resulting in moisture, deformation and shrinkage of the frame and filler inside the cloth sofa. This problem is easy to appear when cleaning the hair area stains on the cloth sofa in general families. If you don't have this experience, you can ask professional cloth sofa cleaning personnel for help. 2. Local scrubbing with clean water This cloth sofa cleaning method is mainly used when the cloth sofa is dirty. It is mainly to remove the mask of the cloth sofa and then clean it according to the sofa cleaning instructions. 3. Use special cleaner Sometimes there are small stains on the cloth sofa, which can be cleaned with special detergent for sofa or carpet (carpet decoration effect drawing). The specific cleaning method of cloth sofa is to use a clean white cloth dipped in a small amount of detergent and wipe the stain repeatedly until the stain is removed. 4. Use sponge and special cleaner Static electricity is helpful to remove stains, and the friction between sponge and fabric of cloth sofa will produce static electricity. However, experts remind consumers that because the sponge has good water absorption, it can be used as much as possible when dipping in detergent to avoid waste. This cloth sofa cleaning method is very effective. 5. Clean regularly every year Under normal circumstances, the sofa cloth of cloth sofa should be removed and cleaned once a year, and the special detergent should be used when cleaning the surface cloth of cloth sofa. After cleaning, the detergent should be completely washed off, otherwise the sofa will be more likely to be stained with dirt in the future. The cushion and cushion of cloth sofa can also be exposed to the sun, which has the effect of sterilization.
2021-01-05
How

How to buy cabinets

The method of purchasing cabinets. Cabinets are one of the more common furniture in our life. Many friends don't know what problems to pay attention to when purchasing cabinets. This paper introduces the common methods of purchasing cabinets for you. Take a look at the edge sealing of the plate. The edge sealing of high-quality cabinets is delicate, smooth and feels good, the sealing line is straight and smooth, and the joint is fine. Professional large factories use linear edge banding machine to complete the processes of edge banding, broken end, trimming, chamfering and polishing at one time, so as to ensure the most accurate size. The workshop type small factory is to apply glue with a brush, manually press and seal the edge, repair the edge with a wallpaper knife, and polish with a manual polishing machine. Due to uneven pressure, many places are not firm, and formaldehyde and other harmful substances will volatilize into the air. Second, look at punching. The current panel furniture is assembled by three in one connectors. The matching and accuracy of the hole position will affect the structural firmness of the cabinet. Third, look at the cutting board. Cutting board is the first process of cabinet production. Large professional enterprises use electronic cutting saws to input processing dimensions through computers, and the computer controls the dimensional accuracy of material selection. In addition, several plates can be processed at one time. The performance of the equipment is stable, the dimensional accuracy of the plates is very high, and the tolerance unit is in microns. Look at the door panel. The door panel is the face of the cabinet, which is as important as people's face. The door panels produced by small factories are prone to moisture and deformation due to improper treatment of substrate and surface technology.
2021-01-05
Pay

Pay attention to the use of sofa

In order to keep the sofa neat and beautiful and prolong its service life, daily maintenance is very important. Here are some precautions for sofa in daily use: 1. The sofa shall be placed on a flat ground, and soft cushions shall be placed at the bottom of the four corners to prevent damage to the floor during movement. 2. Wipe the dust and dirt on the surface of the sofa with a clean soft cloth before use. If it is made of cow leather (genuine leather), gently wipe the surface of the sofa with a care agent for one to two times before use (do not use waxy care products), so as to form a protective film on the surface of cow leather (genuine leather), so that the dirt in the future is not easy to go deep into the pores of the leather and is convenient for cleaning in the future. 3. Avoid jumping on the sofa seat surface to avoid deformation after local compression and affect the use. 4. Avoid the contact surface of appliances with acute angles or knives to prevent scratching the fabric. 5. Avoid the deformation and loss of elasticity of leather fabrics caused by long-term sunlight exposure on the sofa. In case of frequent sunlight exposure, adjust the positions of several sofas at intervals to prevent obvious color difference; 6. Avoid swelling, relaxation and loss of elasticity of leather surface caused by rain or excessive humidity, or discoloration, discoloration or mildew of leather. In case of high humidity, the weak sun from 8:00 to 10:00 in the morning can be used to irradiate for 7 days, one hour a day, about once every three months. 7. Daily maintenance: use a clean soft cloth to wipe the sink or stain of the fabric regularly. Vacuum cleaner can be used to clean sundries at the joint of back, handrail and seat surface. It is forbidden to use wet cloth, hard objects or chemicals such as acid and alkali to contact the fabric, so as not to affect the surface quality and service life. 8. Regular maintenance: there are pores on the surface of cow leather, which can be maintained in dry and wet seasons as human skin. Clean and oil once every two months in dry season, and maintain once every 3-4 months in normal season. Textile fabrics such as cotton, hemp and man-made fibers should be disassembled and dry cleaned, not washed, and bleaching is prohibited because they are sensitive to acidic substances. If loose thread ends are found, do not break them by hand, and use scissors to cut them neatly. 9. Avoid soiling the sofa with oil stains, ball point pens, ink, etc. If you accidentally get dirty, you should immediately clean the sofa with leather cleaner. If there is no leather cleaner, you can gently wipe the stain with a clean white towel stained with a little alcohol, then dry it with a dry wet towel, and finally care with protective agent. The sanding leather sofa cannot be cleaned in the above way (except for oil stains on the leather), but can be gently brushed with a fine copper brush to restore its beauty. 10. The sofa shall be placed 5-10mm away and kept ventilated. 11. When the movable parts of the sofa are not flexible or the metal parts and connectors are loose, tighten the connecting screws or add lubricating oil appropriately. 12. When the paint on the wooden handrail turns white due to excessive contact with wet objects, cover it with a damp and hot towel until it turns white.
2021-01-05
Four

Four tips for home cleaning

Every time I clean up, I worry about the stains and dirt attached to the furniture, especially the white furniture, which will overshadow the home. Home cleaning is one of the most annoying things, but if you can make rational use of the cleaning daily necessities around you, you will have twice the effect with half the effort. Today, Xiaobian will teach you some tips for furniture cleaning.
2021-01-05

 

Copyright © 2022 

Introduction of Guangzhou Omanticc Furniture Co., Ltd.

All Rights Reserved. 

 

粤ICP备2022059333号   Powerby: 300.cn   SEO

Add: 1718 and 1719, No.71, Wenming Road, Yuexie District, Guangzhou ,China

 

 

Tel: 0086-20-3428956234289176
Fax: 0086-20-34289176

E-mailsales@highwin-cn.com​
Mobile: 0086-0-13929562261

Feedback

Username used for comment:
客户留言
Description: